Moderator: Community Manager
[Post Reply] [*]  Page 11 of 42  [ 415 posts ]  Go to page « 19 10 11 12 1342 »
Author Message
Colosseum
Post subject: Re: Real Gunbucket Scale, Fake DesignPosted: October 10th, 2013, 2:12 am
Offline
Posts: 5218
Joined: July 26th, 2010, 9:38 pm
Location: Austin, TX
Contact: Website
Not to mention the fact that there's just not enough room in that tiny little rifle for a functioning action.

As has been suggested a million times, get the proportions from all the real life bolt actions drawn in this scale.

_________________
USN components, camouflage colors, & reference links (World War II only)


Top
[Profile] [Quote]
Trojan
Post subject: Re: Real Gunbucket Scale, Fake DesignPosted: October 10th, 2013, 3:47 am
Offline
User avatar
Posts: 1216
Joined: March 26th, 2012, 4:29 am
Location: Big House
Also, while its not as big of a factor as the above mentioned, I really don't think clear mags on the second rifle are worth the reliability issues they come with in that time. While I know the Chauchats problems weren't exclusive to the clear mags, IIRC they were a part of it and they offer little advantage with such a small amount of bullets compared to the risk of dirt and grime getting stuck in the magazine and jamming the rifle

_________________
Projects:
Zealandia AU
John Company AU
References and feedback is always welcome!


Top
[Profile] [Quote]
APDAF
Post subject: Re: Real Gunbucket Scale, Fake DesignPosted: October 10th, 2013, 11:03 pm
Offline
Posts: 1508
Joined: June 3rd, 2011, 10:42 am
klagldsf wrote:
A 24 inch bayonet?
Well you've apparently decided that on your bizarro-Earth humans are a distinctly separate species, so yeah, I guess it flies now.
Nope, just taller, stronger, faster, smarted and better then normal humans.
Think Ubermensch, Kahn etc..
And the Lebel M-1886 had a 20inch spike bayonet.
Colosseum wrote:
Not to mention the fact that there's just not enough room in that tiny little rifle for a functioning action.
As has been suggested a million times, get the proportions from all the real life bolt actions drawn in this scale.
I think what I have done should now fix that problem.
Trojan wrote:
Also, while its not as big of a factor as the above mentioned, I really don't think clear mags on the second rifle are worth the reliability issues they come with in that time. While I know the Chauchats problems weren't exclusive to the clear mags,
I think you are looking at the old drawing, which is replaced by the top one. ;)


Top
[Profile] [Quote]
klagldsf
Post subject: Re: Real Gunbucket Scale, Fake DesignPosted: October 10th, 2013, 11:26 pm
Offline
User avatar
Posts: 2765
Joined: July 28th, 2010, 4:14 pm
APDAF wrote:
Nope, just taller, stronger, faster, smarted and better then normal humans.
Think Ubermensch, Kahn etc..
http://www.shipbucket.com/forums/viewto ... 5675#p5675
Quote:
And the Lebel M-1886 had a 20inch spike bayonet.
Key words: spike bayonet:

http://www.libertytreecollectors.com/pr ... ayonet.JPG

Small, thin, lightweight for its length. And four inches is a huge difference. But whatever.


Top
[Profile] [Quote]
Colosseum
Post subject: Re: Real Gunbucket Scale, Fake DesignPosted: October 11th, 2013, 12:37 am
Offline
Posts: 5218
Joined: July 26th, 2010, 9:38 pm
Location: Austin, TX
Contact: Website
About the longest I've ever seen is a 19" bayonet for an SMLE... and that's not exactly that useful for combat. There's a reason the 8-10" bayonets were adopted later on.

_________________
USN components, camouflage colors, & reference links (World War II only)


Top
[Profile] [Quote]
Judah14
Post subject: Re: Real Gunbucket Scale, Fake DesignPosted: March 22nd, 2015, 3:29 am
Offline
Posts: 752
Joined: March 5th, 2013, 11:18 am
A Gunbucket design from my Republic of Corpus Christi AU:
Saint Barbara Armaments SB556:
[ img ]
Weight: 2.88 kg empty, 3.45 kg loaded
Length: 842 mm stock extended, 758 mm stock retracted
Barrel: 368 mm fluted cold-hammer forged
Cartridge: 5.56 x 45 mm NATO, 300 AAC Blackout
Action: Short-stroke piston, rotating bolt
Rate of fire: 700-800 rounds per minute (cyclic)
Muzzle velocity: Depends on cartridge
Effective range: Depends on cartridge
Feed system: STANAG magazine
Sights: None provided, MIL-STD-1913 rail allows attachment of various sights
The Saint Barbara Armaments SB556 is an assault rifle patterned after the AR-15 design. It uses a gas piston action based on the action used by the Taiwanese T65/T86/T91 family of rifles. The SB556 features a continuous upper receiver that is a rigid platform that allows mounting of accessories without affecting the barrel harmonics. A MIL-STD-1913 rail is provided at the 12 o'clock position and KeyMod slots are provided at the 3, 6 and 9 o'clock positions. KeyMod allows MIL-STD-1913 rail segments to be placed where the user wants them. The lower receiver features ambidextrous controls. The SB556 is equipped with a FAB Defense GLR-16 buttstock and AG-43 pistol grip.

Versions of the SB556 include a "commando" version with a 292 mm barrel, an infantry automatic rifle with a 508 mm barrel, a personal defense weapon with a 190.5 mm barrel and also a 7.62 x 51 mm spin-off design, the SB762.


Last edited by Judah14 on March 31st, 2015, 1:43 pm, edited 1 time in total.

Top
[Profile] [Quote]
rifleman2
Post subject: Re: Real Gunbucket Scale, Fake DesignPosted: March 22nd, 2015, 1:23 pm
Offline
Posts: 601
Joined: February 22nd, 2015, 10:26 am
has anyone done the galil


Top
[Profile] [Quote]
devil505
Post subject: Re: Real Gunbucket Scale, Fake DesignPosted: March 22nd, 2015, 5:39 pm
Offline
Posts: 12
Joined: July 31st, 2010, 9:09 pm
Judah14 wrote:
A Gunbucket design from my Republic of Corpus Christi AU:
Saint Barbara Armaments SB556:
[ img ]
Weight: 2.88 kg empty, 3.45 kg loaded
Length: 842 mm stock extended, 758 mm stock retracted
Barrel: 368 mm fluted cold-hammer forged
Cartridge: 5.56 x 45 mm NATO
Action: Short-stroke piston, rotating bolt
Rate of fire: 700-800 rounds per minute (cyclic)
Muzzle velocity: 880 m/s
Effective range: 500 m point target
Feed system: STANAG magazine
Sights: None provided, MIL-STD-1913 rail allows attachment of various sights
The Saint Barbara Armaments SB556 is an assault rifle patterned after the AR-15 design. It uses a gas piston action based on the action used by the Taiwanese T65/T86/T91 family of rifles. The SB556 features a continuous upper receiver that is a rigid platform that allows mounting of accessories without affecting the barrel harmonics. A MIL-STD-1913 rail is provided at the 12 o'clock position and KeyMod slots are provided at the 3, 6 and 9 o'clock positions. KeyMod allows MIL-STD-1913 rail segments to be placed where the user wants them. The lower receiver features ambidextrous controls. The SB556 is equipped with a FAB Defense GLR-16 buttstock and AG-43 pistol grip.

Versions of the SB556 include a "commando" version with a 292 mm barrel, a 7.62 x 35 mm (a.k.a. 300 AAC Blackout) variant that comes with 368 mm and 292 mm barrels, an infantry automatic rifle with a 508 mm barrel and also a 7.62 x 51 mm spin-off design, the SB762, which uses a modified KAC SR25/Armalite AR-10 receiver.
I like it!


Top
[Profile] [Quote]
Judah14
Post subject: Re: Real Gunbucket Scale, Fake DesignPosted: March 31st, 2015, 2:11 pm
Offline
Posts: 752
Joined: March 5th, 2013, 11:18 am
Edited the original SB556 post to reflect multicaliber options. Now here are the SB556 Commando, IAR and PDW variants:
SB556 Commando:
[ img ]
Weight: 2.45 kg empty, 3.2 kg loaded
Length: 760 mm stock extended, 680 mm stock retracted
Barrel: 292 mm fluted cold-hammer forged
Cartridge: 5.56 x 45 mm NATO, 300 AAC Blackout
Action: Short-stroke piston, rotating bolt
Rate of fire: 700-800 rounds per minute (cyclic)
Muzzle velocity: Depends on cartridge
Effective range: Depends on cartridge
Feed system: STANAG magazine
Sights: None provided, MIL-STD-1913 rail allows attachment of various sights
SB556IAR:
[ img ]
Weight: 3.2 kg empty, 3.8 kg loaded
Length: 982 mm stock extended, 898 mm stock retracted
Barrel: 508 mm fluted cold-hammer forged
Cartridge: 5.56 x 45 mm NATO
Action: Short-stroke piston, rotating bolt
Rate of fire: 700-800 rounds per minute (cyclic)
Muzzle velocity: 948 m/s
Effective range: 600 m point target
Feed system: STANAG magazine
Sights: None provided, MIL-STD-1913 rail allows attachment of various sights
SB556PDW:
[ img ]
Weight: 2.05 kg empty, 2.8 kg loaded
Length: 658.5 mm stock extended, 578.5 mm stock retracted
Barrel: 190.5 mm fluted cold-hammer forged
Cartridge: 5.56 x 45 mm NATO, 300 AAC Blackout
Action: Short-stroke piston, rotating bolt
Rate of fire: 700-800 rounds per minute (cyclic)
Muzzle velocity: Depends on cartridge
Effective range: Depends on cartridge
Feed system: STANAG magazine
Sights: None provided, MIL-STD-1913 rail allows attachment of various sights


Top
[Profile] [Quote]
Judah14
Post subject: Re: Real Gunbucket Scale, Fake DesignPosted: April 3rd, 2015, 3:22 am
Offline
Posts: 752
Joined: March 5th, 2013, 11:18 am
St Barbara Armaments SB762:
The Saint Barbara Armaments SB762 is a battle rifle patterned from the AR-10 design. It uses a gas piston action based on the action used by the Taiwanese T65/T86/T91 family of rifles. The SB762 features a continuous upper receiver that allows a rigid platform that allows mounting of accessories without affecting the barrel harmonics. A MIL-STD-1913 rail is provided at the 12 o'clock position and KeyMod slots are provided at the 3, 6 and 9 o'clock positions. KeyMod allows MIL-STD-1913 rail segments to be placed where the user wants them. The lower receiver features ambidextrous controls. The SB762 is equipped with a FAB Defense GLR-16 buttstock and AG-43 pistol grip.

The sniper rifle variant of the SB762 is the SB762-SASS. It features semiautomatic-only fire and an accurised stainless steel barrel. It is equipped with a FAB Defense SSR-25 sniper buttstock and AG-43 pistol grip.
SB762 battle rifle:
[ img ]
Weight: 5.50 kg empty, 6.20 kg loaded
Length: 1018.54 mm stock extended, 934.54 mm stock retracted
Barrel: 508 mm fluted cold-hammer forged
Cartridge: 7.62 x 51 mm NATO
Action: Short-stroke piston, rotating bolt
Rate of fire: 700-800 rounds per minute (cyclic)
Muzzle velocity: 783 m/s
Effective range: 800 m
Feed system: SR-25-style magazine
Sights: None provided, MIL-STD-1913 rail allows attachment of various sights
SB762 carbine:
[ img ]
Weight: 5.20 kg empty, 5.90 kg loaded
Length: 878.54 mm stock extended, 794.54 mm stock retracted
Barrel: 368 mm fluted cold-hammer forged
Cartridge: 7.62 x 51 mm NATO
Action: Short-stroke piston, rotating bolt
Rate of fire: 700-800 rounds per minute (cyclic)
Muzzle velocity: 680 m/s
Effective range: 700 m
Feed system: SR-25-style magazine
Sights: None provided, MIL-STD-1913 rail allows attachment of various sights
SB762-SASS:
[ img ]
Weight: 5.50 kg empty, 6.20 kg loaded
Length: 1016 mm
Barrel: 508 mm fluted cold-hammer forged
Cartridge: 7.62 x 51 mm NATO
Action: Short-stroke piston, rotating bolt
Rate of fire: semiautomatic
Muzzle velocity: 783 m/s
Effective range: 800 m
Feed system: SR-25-style magazine
Sights: Schmidt & Bender 3-12 x 50 PM-II scope, Aimpoint Micro T-1 red dot sight, MIL-STD-1913 rail allows attachment of various sights


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 11 of 42  [ 415 posts ]  Return to “Non-Shipbucket Drawings” | Go to page « 19 10 11 12 1342 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 14 guests


The team | Delete all board cookies | All times are UTC


Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]