Moderator: Community Manager
[Post Reply] [*]  Page 12 of 16  [ 159 posts ]  Go to page « 110 11 12 13 1416 »
Author Message
heuhen
Post subject: Re: Fast battleship challenge!Posted: June 6th, 2018, 6:31 pm
Offline
User avatar
Posts: 9102
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!
seeing that some people have added top-view... I have also added an simple top-view of my Battleship, at the moment, only for Batch 1 variant, light AA-armament drawing!

It is missing some details here and there and need some color adjustment some places, to be good enough.

You find it on page 6 ;)


sorry :lol:


Top
[Profile] [Quote]
maomatic
Post subject: Re: Fast battleship challenge!Posted: June 8th, 2018, 7:55 pm
Offline
Posts: 493
Joined: February 20th, 2014, 7:46 pm
Location: Germany
Excellent work, heuhen!

I really like your "simple" (as in very detailed ;) ) top-view. The shading in particular is so well done, it almost feels like cheating... (sorry :D )

You seem to be missing some info on the armor-thickness, though. I'd be interested to see some numbers.


Top
[Profile] [Quote]
heuhen
Post subject: Re: Fast battleship challenge!Posted: June 8th, 2018, 9:20 pm
Offline
User avatar
Posts: 9102
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!
maomatic wrote: *
Excellent work, heuhen!

I really like your "simple" (as in very detailed ;) ) top-view. The shading in particular is so well done, it almost feels like cheating... (sorry :D )

You seem to be missing some info on the armor-thickness, though. I'd be interested to see some numbers.
she have a very complex armor layout, where the armor-belt is thickest over the most vital areas, thinner armor over other area between this vital areas, box over vital areas, for example only have of the engine room are fully protected over most vital areas, other areas have basic protection or what is belived the most common way for an shell to come trough.

I have to play around with SS to get an idea, but I expect those numbers to be around:
Belts up to 13 in and 4-8in in other areas with water and sand/gravel behind, some areas might also have concrete.'
Barbette from 10 in to 17 in
Turrets from 8 in to 19 in
conning tower from 13 in to 17 in
decks:
main from 0.5 in to 2.0 in
second up to max 6.0 in
splinter 0.4 in to 0.7 in over machinery , up to 1.5 in over magazines
box: from 1 in to 5 in

Additional there is also a use of en experimental form of pressurized rooms, in hope it reduce the speed of possible flooding. additional the magazine have been tried designed in such way that if en explosion occurs in the magazine, the explosion should be lead out trough the hull at water level at designed weak points and flooding trough that weak point, in hope that the ship can survive... in theory, idea was never test out at full scale.... luckily.

as soon I have something I'll update


Top
[Profile] [Quote]
reytuerto
Post subject: Re: Fast battleship challenge!Posted: June 10th, 2018, 10:25 pm
Offline
User avatar
Posts: 1647
Joined: February 21st, 2015, 12:03 am
Good afternoon, gentlemen!

I had finished! Here is my candidate for the fast battleship challenge!
[ img ]
The specs are the following ones:

Laid down: 1927, Launched: 1930, Completed: 1933.

Displacement:
28,500 t light; 32,000 t standard; 34,500 t full war load

Dimensions: Length (overall) x beam x draught (normal/deep)
197.10 m x 32 m x (8 / 8.4 m)

Armament:
2 x 4 x 356 mm (two quad turrets) / 45 cal wire wound, BL guns in quad turrets on barbette mounts, with 32 deg elevation / 720 kg AP shells, 220 rounds per gun.
4 x 2 x 152 mm (four twin turrets) / 50 cal wire wound, BL guns in twin turrets, 45 deg elevation / 45 kg AP shells, 300 rounds per gun.
7 x 2 x 102 mm (seven twin mounts) / 45 cal LA/HA QF autofretted monobloc barrel, -10 to + 85 deg dual purpose guns, 15 kg HA shell, 450 rounds per gun
8 x 2 x 40 mm L60 Bofors AA Model 1928 HA gun.
1 stern catapult for up to 3 recce aircraft.

Armour:
Belts (max): 350 mm, main belt inclined 23 degrees, external.
Main Torpedo Bulkhead: 100 mm
Turret Face (max): 350 mm
Barbette (max): 305 mm
Main Deck: 140 mm
Upper Deck: 50 mm
Conning towers (max): 250 mm

Machinery:
Oil fired water tube boilers, steam geared turbines, 4 shafts, 100,000 shp = 28 kts
Range 7,000nm at 15.00 kts

Steady gun plataform.
Good seakeaping, but somewhat wet forward.

Complement:
1,450

Excellent machinery, storage, compartmentation spaces, good accommodation.

Credits: Thanks to Hood, Bombhead, Colosseum (I mimic the very difficult "joint line" between the lower edge of the belt and the antitorpedo protection from your Washington BB), Enrr and BB1987. Special thanks to the "board of experts": Your comments were the guidelines to this design (since the inception) of this drawing. The final drawing is very different to the vessels that I use to draw (probably a KGV with triple 14 inch monobloc guns), but sometimes going out from our comfort zone is very interesting :D . Cheers!


Last edited by reytuerto on June 17th, 2018, 12:37 am, edited 1 time in total.

Top
[Profile] [Quote]
ABetterName
Post subject: Re: Fast battleship challenge!Posted: June 11th, 2018, 12:34 pm
Offline
Posts: 372
Joined: April 16th, 2015, 7:39 pm
Location: Konugenshafn, Nyrdanmark
For my entry, I give you the never-built first step on Nyrdanmark's quest for an escalation clause battleship.

[ img ]

Displacement: 50,300 t

Length: 880 ft WL, 892.6 ft OA

Beam: 105 ft, 115 ft bulges

Draft: 29 ft

Protection: 12" armor belt with 15 degrees inclination, 5" uppers and ends, 4" deck, 4" torpedo bulkhead, 15" turret face armor, 12" barbettes, 18.11" forward conning tower, 16" aft conning tower

Armament: 8x356mm, 16x127mm, 16x88mm

Propulsion: 235,985 shp electric drive, design speed of 33 knots

Range: 5,300 nm at 18 kts

Of note is her apparent lack of light AA, which is a side effect of the design never leaving the preliminary stages.

_________________
"The first phase of the operation did not go as planned." - Anonymous
[ img ]


Last edited by ABetterName on June 19th, 2018, 2:48 pm, edited 1 time in total.

Top
[Profile] [Quote]
Aiseus
Post subject: Re: Fast battleship challenge!Posted: June 11th, 2018, 7:08 pm
Offline
User avatar
Posts: 41
Joined: January 20th, 2017, 4:30 am
Location: Trikona, West Siadria
Consider this my first real post on the forum (my last one was a long time ago and definitely not up to standard).
[ img ]

I hope I'm in time for this... I only just came back to drawing recently and I haven't been on the forum too much lately. This is Albert Welkin, a Battlecruiser of the Diotan Commonwealth completed as of 1920 (1935 for our purposes). She's going to be used in an upcoming AU I have planned, but I don't want to have any less than 10 drawings and a full writeup for every ship I have done before I actually post that. In the meantime, I noticed my latest drawing seems to fulfill the requirements for this contest so I might as well throw my hat in the ring.

Stats are below!

She weighs 27,512 tons, a relative lightweight among a lot of the other designs, and measures in at a length of 217 meters, a draft of 8 meters at normal displacement, and a beam of 28.3 meters. Her armor is relatively poor, as is to be expected from a battlecruiser, with only 135 mm of main belt armor, 13 mm of end armor, and an upper belt of 72 mm. Her torpedo bulkheads measure 22 mm, and her armor deck is 120 mm over the main deck, and 79 over the quarterdeck, with an unarmored forecastle. Her conning tower measures 400 mm, as is standard for Diotan heavy vessels. Her main battery consists of 4x2 355 mm Lirovia main guns, and she carries a secondary armament of 8x2 125 mm dual purpose guns. Her light AA is lacking, as this is her as commissioned in 1920, but she still carries a battery of 40 20 mm guns in 10 mounts. Her speed, however, is more than adequate, able to reach 30 knots as designed. Additionally, she carries 2 JM-11 FH-1 floatplanes, with one on the catapult and one disassembled.

She would be given an expanded AA suite upon her refit on the outbreak of war in 1921 (not pictured).

Also, the cranes, catapult, and small boats aren't mine, but I got them from a part sheet so I'm not sure if I should credit them.


Top
[Profile] [Quote]
emperor_andreas
Post subject: Re: Fast battleship challenge!Posted: June 11th, 2018, 10:57 pm
Offline
Posts: 3910
Joined: November 17th, 2010, 8:03 am
Location: Corinth, MS USA
Contact: YouTube
ABetterName: Very nice! I like the turret arrangement aft...reminds me of the IJN's Kongos.

Aiseus: Very nice work, also! I like the strong, muscular-looking superstructure...makes the ship look like she'd be a bruiser in combat!

_________________
[ img ]
MS State Guard - 08 March 2014 - 28 January 2023

The Official IJN Ships & Planes List

#FJB


Top
[Profile] [Quote]
Shigure
Post subject: Re: Fast battleship challenge!Posted: June 14th, 2018, 4:12 pm
Offline
User avatar
Posts: 967
Joined: May 25th, 2016, 2:05 pm
Azura Junko class fast battleship

[ img ]

Here is my entry! I make references to characters in the description, and if anybody cares enough, here is a small graph that explains their ranking structure and relationships with regards to each other, etc.

---SS report---

Azura Junko, Antaran battleship laid down 1938 (Engine 1939)

Displacement:
56 191 t light; 58 486 t standard; 59 916 t normal; 61 061 t full load

Dimensions: Length (overall / waterline) x beam x draught (normal/deep)
(952.93 ft / 918.64 ft) x 131.23 ft x (36.09 / 36.60 ft)
(290.45 m / 280.00 m) x 40.00 m x (11.00 / 11.15 m)

Armament:
9 - 16.14" / 410 mm 50.0 cal guns - 2 226.23lbs / 1 009.80kg shells, 80 per gun
Breech loading guns in turret on barbette mounts, 1938 Model
2 x 3-gun mounts on centreline, forward deck forward
1 raised mount - superfiring
1 x 3-gun mount on centreline, aft deck aft
28 - 5.00" / 127 mm 50.0 cal guns - 66.16lbs / 30.01kg shells, 200 per gun
Dual purpose guns in deck mounts, 1938 Model
14 x Twin mounts on sides, evenly spread
6 raised mounts
Weight of broadside 21 889 lbs / 9 928 kg

Armour:
- Belts: Width (max) Length (avg) Height (avg)
Main: 16.0" / 406 mm 459.32 ft / 140.00 m 13.75 ft / 4.19 m
Ends: 5.00" / 127 mm 459.28 ft / 139.99 m 13.75 ft / 4.19 m
Upper: 7.99" / 203 mm 459.32 ft / 140.00 m 8.01 ft / 2.44 m
Main Belt covers 77% of normal length

- Torpedo Bulkhead - Additional damage containing bulkheads:
3.54" / 90 mm 459.32 ft / 140.00 m 31.10 ft / 9.48 m
Beam between torpedo bulkheads 122.05 ft / 37.20 m

- Gun armour: Face (max) Other gunhouse (avg) Barbette/hoist (max)
Main: 16.0" / 406 mm 12.0" / 305 mm 16.0" / 406 mm
2nd: 0.98" / 25 mm 0.98" / 25 mm -

- Armoured deck - multiple decks:
For and Aft decks: 6.10" / 155 mm
Forecastle: 0.79" / 20 mm Quarter deck: 0.79" / 20 mm

- Conning towers: Forward 15.98" / 406 mm, Aft 15.98" / 406 mm

Machinery:
Oil fired boilers, steam turbines,
Electric cruising motors plus geared drives, 4 shafts, 249 316 shp / 185 990 Kw = 32.88 kts
Range 7 996nm at 10.00 kts
Bunker at max displacement = 2 575 tons

Complement:
1 914 - 2 489

Cost:
£28.655 million / $114.620 million

Distribution of weights at normal displacement:
Armament: 4 703 tons, 7.9%
- Guns: 4 703 tons, 7.9%
Armour: 20 900 tons, 34.9%
- Belts: 7 054 tons, 11.8%
- Torpedo bulkhead: 1 873 tons, 3.1%
- Armament: 4 436 tons, 7.4%
- Armour Deck: 6 482 tons, 10.8%
- Conning Towers: 1 055 tons, 1.8%
Machinery: 6 746 tons, 11.3%
Hull, fittings & equipment: 22 692 tons, 37.9%
Fuel, ammunition & stores: 3 725 tons, 6.2%
Miscellaneous weights: 1 150 tons, 1.9%
- Hull above water: 1 150 tons

Overall survivability and seakeeping ability:
Survivability (Non-critical penetrating hits needed to sink ship):
77 877 lbs / 35 324 Kg = 37.0 x 16.1 " / 410 mm shells or 13.7 torpedoes
Stability (Unstable if below 1.00): 1.00
Metacentric height 7.5 ft / 2.3 m
Roll period: 20.1 seconds
Steadiness - As gun platform (Average = 50 %): 84 %
- Recoil effect (Restricted arc if above 1.00): 0.51
Seaboat quality (Average = 1.00): 1.12

Hull form characteristics:
Hull has a flush deck,
an extended bulbous bow and a round stern
Block coefficient (normal/deep): 0.482 / 0.484
Length to Beam Ratio: 7.00 : 1
'Natural speed' for length: 30.31 kts
Power going to wave formation at top speed: 51 %
Trim (Max stability = 0, Max steadiness = 100): 75
Bow angle (Positive = bow angles forward): 35.00 degrees
Stern overhang: 3.28 ft / 1.00 m
Freeboard (% = length of deck as a percentage of waterline length):
Fore end, Aft end
- Forecastle: 25.00%, 44.29 ft / 13.50 m, 27.26 ft / 8.31 m
- Forward deck: 30.00%, 27.26 ft / 8.31 m, 21.23 ft / 6.47 m
- Aft deck: 20.00%, 21.23 ft / 6.47 m, 21.23 ft / 6.47 m
- Quarter deck: 25.00%, 21.23 ft / 6.47 m, 21.23 ft / 6.47 m
- Average freeboard: 25.34 ft / 7.73 m

Ship space, strength and comments:
Space - Hull below water (magazines/engines, low = better): 76.8%
- Above water (accommodation/working, high = better): 181.2%
Waterplane Area: 79 034 Square feet or 7 342 Square metres
Displacement factor (Displacement / loading): 107%
Structure weight / hull surface area: 231 lbs/sq ft or 1 130 Kg/sq metre
Hull strength (Relative):
- Cross-sectional: 0.97
- Longitudinal: 1.29
- Overall: 1.00
Excellent machinery, storage, compartmentation space
Excellent accommodation and workspace room
Ship has slow, easy roll, a good, steady gun platform

_________________
[ img ]


Last edited by Shigure on June 21st, 2018, 7:44 am, edited 2 times in total.

Top
[Profile] [Quote]
erik_t
Post subject: Re: Fast battleship challenge!Posted: June 14th, 2018, 4:18 pm
Offline
Posts: 2936
Joined: July 26th, 2010, 11:38 pm
Location: Midwest US
Beautiful and colossal. It seems like it would be a hard sell to put 3x3 16" on fully 60,000 tons, although she would end up being an excellent AA escort.

One wonders what the turning radius would be with the primary rudder disabled :lol:


Top
[Profile] [Quote]
Sareva
Post subject: Re: Fast battleship challenge!Posted: June 14th, 2018, 4:19 pm
Offline
User avatar
Posts: 78
Joined: June 9th, 2017, 9:48 pm
A big girl.

_________________
shib goes bork


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 12 of 16  [ 159 posts ]  Return to “Drawing Challenges” | Go to page « 110 11 12 13 1416 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 35 guests


The team | Delete all board cookies | All times are UTC


Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]