» »

Moderator: Community Manager
[Post Reply] [*]  Page 30 of 34  [ 333 posts ]  Go to page « 1 … 28 29 30 31 32 … 34 »
[Print view]
Author Message
sebu
Post subject: Re: Rehearsals for an AUPosted: October 13th, 2018, 12:56 pm
Offline
Posts: 646
Joined: August 18th, 2010, 9:18 am
Thanks Hood.
Hood wrote: *October 13th, 2018, 8:15 am
Side-by-side twin internal pressure hulls?
To be honest, I'm not sure but it could be something like this:
[ img ]

Might be enough to Finnish gulf where the average depth is 34m?
Top
[Profile] [Quote]
heuhen
Post subject: Re: Rehearsals for an AUPosted: October 13th, 2018, 1:27 pm
Offline
User avatar
Posts: 9102
Joined: December 15th, 2010, 10:13 pm
Location: Behind you, looking at you with my mustache!
for the Finnish gulf it is good enough, isn't so deep, so no need to have the capability to go deep. but you might want to design in some sorts of rails/skies on it, I bet it will use most of it time at laying on the bottom, for then more to a new location.

what about water-inflated balloons, it protect the hull toward the bottom and at the same time weight here down when she is on the bottom.
Top
[Profile] [Quote]
odysseus1980
Post subject: Re: Rehearsals for an AUPosted: October 13th, 2018, 1:39 pm
Offline
User avatar
Posts: 3607
Joined: November 8th, 2010, 8:53 am
Location: Athens,Hellenic Kingdom
Contact: Website
On the other hand most older Swedish submarines had maximum depth of 150m, so this would be your depth limit for Baltic.
Top
[Profile] [Quote]
sebu
Post subject: Re: Rehearsals for an AUPosted: October 13th, 2018, 2:58 pm
Offline
Posts: 646
Joined: August 18th, 2010, 9:18 am
Thanks for comments lads.
heuhen wrote: *October 13th, 2018, 1:27 pm
for the Finnish gulf it is good enough, isn't so deep, so no need to have the capability to go deep. but you might want to design in some sorts of rails/skies on it, I bet it will use most of it time at laying on the bottom, for then more to a new location.

what about water-inflated balloons, it protect the hull toward the bottom and at the same time weight here down when she is on the bottom.
Yes, you're right heuhen. Water-inflated balloons is an interesting idea but I follow SMX-26 concept design here with wheels. There may occur slight movement so therefore wheels.

I hope this could dive to 150m with this pressure hull solution... :?:

[ img ]
Top
[Profile] [Quote]
erik_t
Post subject: Re: Rehearsals for an AUPosted: October 13th, 2018, 4:41 pm
Offline
Posts: 2936
Joined: July 26th, 2010, 11:38 pm
Location: Midwest US
I think a double-bubble section is more likely, something like this:

[ img ]

Easier to build (constant-curvature rolled sections), stronger for its weight, more efficient distribution of volume.
Top
[Profile] [Quote]
sebu
Post subject: Re: Rehearsals for an AUPosted: October 13th, 2018, 8:06 pm
Offline
Posts: 646
Joined: August 18th, 2010, 9:18 am
Thanks erik_t. So, little modifications:

[ img ]
Top
[Profile] [Quote]
Rhade
Post subject: Re: Rehearsals for an AUPosted: October 13th, 2018, 9:28 pm
Offline
User avatar
Posts: 2804
Joined: July 27th, 2010, 12:45 pm
Location: Poland
Baltic have some really deep places (for such sea of course) but overall it's average is 55 to 60 meters. That would be a coastal sub rather, so 150m would be more then enough for Finland and Riga gulf. Not enough for some deeps of Bothnia but you don't need to send such small sub to that deep water.

Overall, very fine design.

_________________
[ img ]
Nobody expects the Imperial Inquisition!


Top
[Profile] [Quote]
sebu
Post subject: Re: Rehearsals for an AUPosted: October 29th, 2018, 7:32 pm
Offline
Posts: 646
Joined: August 18th, 2010, 9:18 am
Plane time...
[ img ]

2x Volvo RM12+
6500 kg of stuff
5500+2500 kg of kerosine
some goggles & gadgets
2x Madsen 25mm rev.gun (150 ammo/each)
(25mm centerline pod (300 ammo))
100% nasty s.. o. t.. b....
Top
[Profile] [Quote]
eswube
Post subject: Re: Rehearsals for an AUPosted: October 29th, 2018, 8:33 pm
Offline
Posts: 10696
Joined: June 15th, 2011, 8:31 am
Very nice!
I just have a feeling that I saw something bit similar before?... ;)

[ img ]
Top
[Profile] [Quote]
sebu
Post subject: Re: Rehearsals for an AUPosted: October 30th, 2018, 4:34 am
Offline
Posts: 646
Joined: August 18th, 2010, 9:18 am
Thanks eswube. Yeah, that's definitely an ancestor of it :)
Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 30 of 34  [ 333 posts ]  Return to “Alternate Universe Designs” | Go to page « 1 … 28 29 30 31 32 … 34 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 26 guests

The team | Delete all board cookies | All times are UTC


cron
Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]