Moderator: Community Manager
[Post Reply] [*]  Page 1 of 3  [ 22 posts ]  Go to page 1 2 3 »
Author Message
Aster
Post subject: AU multi-role fighterPosted: August 29th, 2012, 8:14 pm
Offline
Posts: 57
Joined: August 25th, 2011, 6:28 pm
Hey all,

I've just bashed this out for my AU (well, micronation actually), and I'm not entirely happy with it and would enjoy some input, if you would be so good.

It performs the same role as the Su-27, and possesses the same engine and a similar airframe to that bird. The difference is in the avionics, which are all (RWR, the AESA radar etc) swiped from the F-35 Lightning II, and in it's possession of interior weapons bays.

What I am worried about is the rear of the craft - for some reason the tailplanes and wings just don't seem...right. But I'm rather pleased with the cockpit, nose and engine intake.

I'll credit it all when it's done and dusted.

[ img ]


Top
[Profile] [Quote]
Aster
Post subject: Re: AU multi-role fighterPosted: August 29th, 2012, 10:23 pm
Offline
Posts: 57
Joined: August 25th, 2011, 6:28 pm
can I bump?


Top
[Profile] [Quote]
Demon Lord Razgriz
Post subject: Re: AU multi-role fighterPosted: August 29th, 2012, 10:39 pm
Offline
User avatar
Posts: 446
Joined: July 27th, 2010, 1:18 am
Location: Eastern North Carolina
You need to put it in the template and get credit to those whose planes you've used. Like mine & Alvama's X-02:

[ img ]

_________________
95% of my drawings are destined for NS, 4.9% for fun, & .1% serious.
Worklist:
Space Shuttle
Atlas V
Delta II/III
Project Constellation
Soyuz series


Top
[Profile] [Quote]
Aster
Post subject: Re: AU multi-role fighterPosted: August 29th, 2012, 10:42 pm
Offline
Posts: 57
Joined: August 25th, 2011, 6:28 pm
Yeah as I said - I've got a huge paint page full of all the stuff I've used (it's a real mess), but I just slapped this on the forum because I wanted a quick bit of as you go advice. Anything to suggest?


Top
[Profile] [Quote]
Rhade
Post subject: Re: AU multi-role fighterPosted: August 30th, 2012, 6:22 am
Offline
User avatar
Posts: 2804
Joined: July 27th, 2010, 12:45 pm
Location: Poland
Aster wrote:
can I bump?
The road of bump end with ban ... we don't bump here lad. ;)

If your plane possesses similar airframe to Su-27, where you put that weapon bay ?

_________________
[ img ]
Nobody expects the Imperial Inquisition!


Top
[Profile] [Quote]
Blackbuck
Post subject: Re: AU multi-role fighterPosted: August 30th, 2012, 1:08 pm
Offline
Posts: 2743
Joined: July 27th, 2010, 9:15 am
Location: Birmingham, United Kingdom
I'm pretty sure there has been mention of skinning the "tunnel" on the flanker and using it for internal weapons carriage so there could do... You could also bulge out the nacelles and put SRAAMs in there I guess. I must say though it looks really oddly proportioned, too small imho (at least from the intakes back).

_________________
AU Projects: | Banbha et al. | New England: The Divided States
Blood and Fire


Top
[Profile] [Quote]
Rhade
Post subject: Re: AU multi-role fighterPosted: August 30th, 2012, 2:12 pm
Offline
User avatar
Posts: 2804
Joined: July 27th, 2010, 12:45 pm
Location: Poland
Like some poor cousin of Flanker. Also I think tail sting should be longer.

_________________
[ img ]
Nobody expects the Imperial Inquisition!


Top
[Profile] [Quote]
Aster
Post subject: Re: AU multi-role fighterPosted: August 30th, 2012, 11:29 pm
Offline
Posts: 57
Joined: August 25th, 2011, 6:28 pm
Thanks for the input guys - how about now?

[ img ]


Top
[Profile] [Quote]
Blackbuck
Post subject: Re: AU multi-role fighterPosted: August 31st, 2012, 12:59 pm
Offline
Posts: 2743
Joined: July 27th, 2010, 9:15 am
Location: Birmingham, United Kingdom
Tail surfaces are much too small (look at the actual Su-27 family) The nose plug between the radome cockpit looks somewhat excessive and the cockpit is going to have pretty poor rearward visibility. Other than that so far it seems a lot better. You might want to bring your rear fuselage back a bit too to provide a screen against the nozzles because right now they are a huge ir signature in all directions.

_________________
AU Projects: | Banbha et al. | New England: The Divided States
Blood and Fire


Top
[Profile] [Quote]
Aster
Post subject: Re: AU multi-role fighterPosted: August 31st, 2012, 4:50 pm
Offline
Posts: 57
Joined: August 25th, 2011, 6:28 pm
[ img ]

How's this?


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 1 of 3  [ 22 posts ]  Return to “FD Scale Drawings” | Go to page 1 2 3 »

Jump to: 

Who is online

Users browsing this forum: No registered users and 17 guests


The team | Delete all board cookies | All times are UTC


Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]