Moderator: Community Manager
[Post Reply] [*]  Page 1 of 1  [ 7 posts ] 
Author Message
jabba
Post subject: Squadron insigniaPosted: June 3rd, 2011, 3:01 pm
Offline
User avatar
Posts: 1012
Joined: April 14th, 2011, 5:00 pm
Location: Under your kitchen sink...
I am currently working on drawing (in FD scale) all British and Argentine aircraft involved in the Falklands Conflict of 1982.

I will be drawing one or two examples of each plane/helicopter involved with accurate paint schemes and squadron markings. I am considering doing squadron insignia to go alongside each drawing as is done in some Shipbucket-scale drawings. The best example of this, in my opinion, are KimWerners coats of arms in bezobrazovs Type 22 drawings done recently.

Would KimWerner, or anyone else be interested in working on this with me?

\/ List of drawings to to can be found below in my signature \/

_________________
[ img ]
Jabba's Worklist


Top
[Profile] [Quote]
Bombhead
Post subject: Re: Squadron insigniaPosted: June 3rd, 2011, 6:21 pm
Offline
User avatar
Posts: 2299
Joined: July 27th, 2010, 7:41 pm
Jabba I have got badges for all naval air sqdns and RAF sqdns if you want them for reference PM me.


Top
[Profile] [Quote]
KimWerner
Post subject: Re: Squadron insigniaPosted: June 3rd, 2011, 8:14 pm
Offline
User avatar
Posts: 2195
Joined: December 22nd, 2010, 12:13 pm
Location: Denmark
Jabba I'm interested but right now a bit hanged up with USS Sacramento (she showed up to be a difficult lady :D ) and two (2) italian crest made in brass. It is some task to figure out to draw brass colour in a way that is thrustworthy.
But if you got the patience I'm in ;)

_________________
Work in progress:
DD County Class PNS Babur (1982)(PAK)
FF Type 21 Class D182 PNS Babur (2000)(PAK)
All relevant Coat of Arms


Top
[Profile] [Quote]
Bombhead
Post subject: Re: Squadron insigniaPosted: June 3rd, 2011, 9:33 pm
Offline
User avatar
Posts: 2299
Joined: July 27th, 2010, 7:41 pm
That's an impressive worklist Jabba.I'm eagerly awaitng to see all that good stuff in FD scale. ;)


Top
[Profile] [Quote]
jabba
Post subject: Re: Squadron insigniaPosted: June 3rd, 2011, 10:56 pm
Offline
User avatar
Posts: 1012
Joined: April 14th, 2011, 5:00 pm
Location: Under your kitchen sink...
KimWerner wrote:
Jabba I'm interested but right now a bit hanged up with USS Sacramento (she showed up to be a difficult lady :D ) and two (2) italian crest made in brass. It is some task to figure out to draw brass colour in a way that is thrustworthy.
But if you got the patience I'm in ;)
Not a problem mate, this is going to take me quite a while to get finished anyway, I am very busy in the 'real' world at the moment too, so no rush!!!

:D I'm going to see what exactly this will involve in the way of drawing tonight/this weekend and will pm you with any questions or news if that's Ok? :D

_________________
[ img ]
Jabba's Worklist


Top
[Profile] [Quote]
KimWerner
Post subject: Re: Squadron insigniaPosted: June 3rd, 2011, 11:09 pm
Offline
User avatar
Posts: 2195
Joined: December 22nd, 2010, 12:13 pm
Location: Denmark
jabba wrote:
KimWerner wrote:
Jabba I'm interested but right now a bit hanged up with USS Sacramento (she showed up to be a difficult lady :D ) and two (2) italian crest made in brass. It is some task to figure out to draw brass colour in a way that is thrustworthy.
But if you got the patience I'm in ;)
Not a problem mate, this is going to take me quite a while to get finished anyway, I am very busy in the 'real' world at the moment too, so no rush!!!

:D I'm going to see what exactly this will involve in the way of drawing tonight/this weekend and will pm you with any questions or news if that's Ok? :D
:D OK ;)

_________________
Work in progress:
DD County Class PNS Babur (1982)(PAK)
FF Type 21 Class D182 PNS Babur (2000)(PAK)
All relevant Coat of Arms


Top
[Profile] [Quote]
jabba
Post subject: Re: Squadron insigniaPosted: June 3rd, 2011, 11:25 pm
Offline
User avatar
Posts: 1012
Joined: April 14th, 2011, 5:00 pm
Location: Under your kitchen sink...
KimWerner wrote:
jabba wrote:
KimWerner wrote:
Jabba I'm interested but right now a bit hanged up with USS Sacramento (she showed up to be a difficult lady :D ) and two (2) italian crest made in brass. It is some task to figure out to draw brass colour in a way that is thrustworthy.
But if you got the patience I'm in ;)
Not a problem mate, this is going to take me quite a while to get finished anyway, I am very busy in the 'real' world at the moment too, so no rush!!!

:D I'm going to see what exactly this will involve in the way of drawing tonight/this weekend and will pm you with any questions or news if that's Ok? :D
:D OK ;)
Oh, I saw your Sacramento the other day, looks like its coming along really well. I particularly like the colour mix you have used for shading, the slightly 'washed out' red of the hull somehow looks better that most others. Looks more realistic that the bright red usually used I think.

Anyway, good luck with the drawing!

_________________
[ img ]
Jabba's Worklist


Top
[Profile] [Quote]
Display: Sort by: Direction:
[Post Reply]  Page 1 of 1  [ 7 posts ]  Return to “FD Scale Drawings”

Jump to: 

Who is online

Users browsing this forum: No registered users and 19 guests


The team | Delete all board cookies | All times are UTC


Powered by phpBB® Forum Software © phpBB Limited
[ GZIP: Off ]